Dokumentation

Produktionskosten

Kostenvoranschläge, Berechnungsanfragen, Materialkosten, Betriebskosten und Werkzeugverschleißaufzeichnungen.

Automatisch aus dem Englischen übersetzt. Englisches Original ansehen

Playground

Senden Sie diese Anfragen an Ihren eigenen laufenden Sidecar. Werte bleiben in diesem Browser.

Nicht verbunden

Basis-URL Inhabertoken optional Sitzungstoken optional

Wie das funktioniert

Der Sidecar lauscht an einem beim Start ausgewählten Loopback-Port und gibt ihn dort aus ready linie; Verwenden Sie diese URL und die CADCAMFUN_TOKEN es wurde damit begonnen. Anfragen gehen direkt von dieser Seite an diese Adresse.

Der Sidecar sendet CORS-Header nur an die Tauri-Ursprünge und an http://localhost oder http://127.0.0.1 auf jedem Port. Von den gehosteten Dokumenten aus blockiert der Browser die Antwort, also führen Sie die Dokumente lokal aus (bun run dev in packages/web), um den Spielplatz zu nutzen, oder kopieren Sie die Anfrage als Curl. Um zu experimentieren, ohne echte Daten zu berühren, starten Sie den Sidecar mit CADCAMFUN_DATA_DIR zeigte auf ein Wegwerfverzeichnis – siehe die API-Komplettlösung.

Operationen

21 Endpunkte in der production-costs gruppe, generiert aus der eigenen Gruppe des Sidecars OpenAPI-Dokument. Geschützte Operationen dauern Authorization: Bearer $CADCAMFUN_TOKEN; sehen authentifizierung. Verhalten und Grenzen sind in das Subsystemhandbuch.

erhalten	/api/production-costs/estimates	production-costs.listEstimates
post	/api/production-costs/estimates	production-costs.createEstimate
erhalten	/api/production-costs/estimates/{id}	production-costs.getEstimate
setzen	/api/production-costs/estimates/{id}	production-costs.updateEstimate
löschen	/api/production-costs/estimates/{id}	production-costs.deleteEstimate
post	/api/production-costs/estimates/calculate	production-costs.calculateEstimate
erhalten	/api/production-costs/material-costs	production-costs.listMaterialCosts
post	/api/production-costs/material-costs	production-costs.createMaterialCost
erhalten	/api/production-costs/material-costs/{id}	production-costs.getMaterialCost
setzen	/api/production-costs/material-costs/{id}	production-costs.updateMaterialCost
löschen	/api/production-costs/material-costs/{id}	production-costs.deleteMaterialCost
erhalten	/api/production-costs/operation-costs	production-costs.listOperationCosts
post	/api/production-costs/operation-costs	production-costs.createOperationCost
erhalten	/api/production-costs/operation-costs/{id}	production-costs.getOperationCost
setzen	/api/production-costs/operation-costs/{id}	production-costs.updateOperationCost
löschen	/api/production-costs/operation-costs/{id}	production-costs.deleteOperationCost
erhalten	/api/production-costs/tool-wear	production-costs.listToolWear
post	/api/production-costs/tool-wear	production-costs.createToolWear
erhalten	/api/production-costs/tool-wear/{id}	production-costs.getToolWear
setzen	/api/production-costs/tool-wear/{id}	production-costs.updateToolWear
löschen	/api/production-costs/tool-wear/{id}	production-costs.deleteToolWear

Produktionskosten Vorgänge in 3D Zum Orbit ziehen · zum Zoomen scrollen · zum Schwenken mit der rechten Maustaste ziehen

Ein Block pro Vorgang (21), gestapelt pro Ressourcenabschnitt dieser Seite und nach Methode gefärbt: grün GET, orange POST, blau PUT, violett PATCH, rot DELETE. Wird zur Erstellungszeit aus dem OpenAPI-Dokument generiert.

/api/production-costs/estimates

erhalten /api/production-costs/estimates # production-costs.listEstimates

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
toolpathId	abfrage	zeichenfolge \| null	optional
projectId	abfrage	zeichenfolge \| null	optional
organizationId	abfrage	„null“ \| zeichenfolge \| null	optional

Antworten

200 Array<Objekt> application/json

Array<{
  id: string
  createdAt: string
  updatedAt: string
  materialCost: number | "Infinity" | "-Infinity" | "NaN"
  toolWearCost: number | "Infinity" | "-Infinity" | "NaN"
  machineTime: number | "Infinity" | "-Infinity" | "NaN"
  machineTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  operatorTime: number | "Infinity" | "-Infinity" | "NaN"
  operatorTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  setupCost: number | "Infinity" | "-Infinity" | "NaN"
  totalCost: number | "Infinity" | "-Infinity" | "NaN"
  currencyCode: string
  ownerId: string | null
  organizationId: string | null
  toolpathId: string
  details: unknown
  operationCostId: string | null
  costSettingsId?: string | null
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
  toolpath: {
    id: string
    name: string
    projectId?: string | null
  }
  operationCost: {
    id: string
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
    currencyCode: string
    name: string
    machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
    operatorHourlyRate: number | "NaN"
    setupTime: number | "NaN"
  } | null
}>

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

Beispielantwort erfasst · 200

GET /api/produktionskosten/schätzungen

[]

SDK-Beispiel

production-costs.listEstimates

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsListEstimatesInput
const result = await client["production-costs"].listEstimates({})

curl

GET /api/produktionskosten/schätzungen

curl --request GET "${CADCAMFUN_URL}/api/production-costs/estimates" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

toolpathId abfrage projectId abfrage organizationId abfrage

post /api/production-costs/estimates # production-costs.createEstimate

Erfordert Authorization: Bearer <token>.

Anforderungstext · erforderlich · application/json

{
  toolpathId: string
  totalCost: number | "Infinity" | "-Infinity" | "NaN"
  materialCost?: number | "Infinity" | "-Infinity" | "NaN" | null
  toolWearCost?: number | "Infinity" | "-Infinity" | "NaN" | null
  machineTime?: number | "Infinity" | "-Infinity" | "NaN" | null
  machineTimeCost?: number | "Infinity" | "-Infinity" | "NaN" | null
  operatorTime?: number | "Infinity" | "-Infinity" | "NaN" | null
  operatorTimeCost?: number | "Infinity" | "-Infinity" | "NaN" | null
  setupCost?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
  details?: unknown | null
  operationCostId?: string | null
  costSettingsId?: string | null
  organizationId?: string | null
}

Antworten

201 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  materialCost: number | "Infinity" | "-Infinity" | "NaN"
  toolWearCost: number | "Infinity" | "-Infinity" | "NaN"
  machineTime: number | "Infinity" | "-Infinity" | "NaN"
  machineTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  operatorTime: number | "Infinity" | "-Infinity" | "NaN"
  operatorTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  setupCost: number | "Infinity" | "-Infinity" | "NaN"
  totalCost: number | "Infinity" | "-Infinity" | "NaN"
  currencyCode: string
  ownerId: string | null
  organizationId: string | null
  toolpathId: string
  details: unknown
  operationCostId: string | null
  costSettingsId?: string | null
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
  toolpath: {
    id: string
    name: string
    projectId?: string | null
  }
  operationCost: {
    id: string
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
    currencyCode: string
    name: string
    machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
    operatorHourlyRate: number | "NaN"
    setupTime: number | "NaN"
  } | null
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.createEstimate

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsCreateEstimateInput
const result = await client["production-costs"].createEstimate({
  toolpathId: "",
  totalCost: 0,
  materialCost: 0,
  toolWearCost: 0,
  machineTime: 0,
  machineTimeCost: 0,
  operatorTime: 0,
  operatorTimeCost: 0,
  setupCost: 0,
  currencyCode: "",
  details: null,
  operationCostId: "",
  costSettingsId: "",
  organizationId: ""
})

curl

POST /api/produktionskosten/schätzungen

curl --request POST "${CADCAMFUN_URL}/api/production-costs/estimates" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

Anforderungstext application/json

erhalten /api/production-costs/estimates/{id} # production-costs.getEstimate

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  materialCost: number | "Infinity" | "-Infinity" | "NaN"
  toolWearCost: number | "Infinity" | "-Infinity" | "NaN"
  machineTime: number | "Infinity" | "-Infinity" | "NaN"
  machineTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  operatorTime: number | "Infinity" | "-Infinity" | "NaN"
  operatorTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  setupCost: number | "Infinity" | "-Infinity" | "NaN"
  totalCost: number | "Infinity" | "-Infinity" | "NaN"
  currencyCode: string
  ownerId: string | null
  organizationId: string | null
  toolpathId: string
  details: unknown
  operationCostId: string | null
  costSettingsId?: string | null
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
  toolpath: {
    id: string
    name: string
    projectId?: string | null
  }
  operationCost: {
    id: string
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
    currencyCode: string
    name: string
    machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
    operatorHourlyRate: number | "NaN"
    setupTime: number | "NaN"
  } | null
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.getEstimate

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsGetEstimateInput
const result = await client["production-costs"].getEstimate({
  id: "<id>"
})

curl

GET /api/produktionskosten/estimates/{id}

curl --request GET "${CADCAMFUN_URL}/api/production-costs/estimates/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

setzen /api/production-costs/estimates/{id} # production-costs.updateEstimate

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Anforderungstext · erforderlich · application/json

{
  currencyCode?: string | null
  details?: unknown | null
  notes?: string | null
}

Antworten

200 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  materialCost: number | "Infinity" | "-Infinity" | "NaN"
  toolWearCost: number | "Infinity" | "-Infinity" | "NaN"
  machineTime: number | "Infinity" | "-Infinity" | "NaN"
  machineTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  operatorTime: number | "Infinity" | "-Infinity" | "NaN"
  operatorTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  setupCost: number | "Infinity" | "-Infinity" | "NaN"
  totalCost: number | "Infinity" | "-Infinity" | "NaN"
  currencyCode: string
  ownerId: string | null
  organizationId: string | null
  toolpathId: string
  details: unknown
  operationCostId: string | null
  costSettingsId?: string | null
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
  toolpath: {
    id: string
    name: string
    projectId?: string | null
  }
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.updateEstimate

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsUpdateEstimateInput
const result = await client["production-costs"].updateEstimate({
  id: "<id>",
  currencyCode: "",
  details: null,
  notes: ""
})

curl

PUT /api/produktionskosten/estimates/{id}

curl --request PUT "${CADCAMFUN_URL}/api/production-costs/estimates/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

ausweis pfad · erforderlich

Anforderungstext application/json

löschen /api/production-costs/estimates/{id} # production-costs.deleteEstimate

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt application/json

{
  message: string
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.deleteEstimate

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsDeleteEstimateInput
const result = await client["production-costs"].deleteEstimate({
  id: "<id>"
})

curl

LÖSCHEN /api/produktionskosten/estimates/{id}

curl --request DELETE "${CADCAMFUN_URL}/api/production-costs/estimates/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

post /api/production-costs/estimates/calculate # production-costs.calculateEstimate

Erfordert Authorization: Bearer <token>.

Anforderungstext · erforderlich · application/json

{
  toolpathId: string
  costSettingsId?: string | null
  organizationId?: string | null
}

Antworten

200 objekt application/json

{
  materialCost: number | "Infinity" | "-Infinity" | "NaN"
  toolWearCost: number | "Infinity" | "-Infinity" | "NaN"
  machineTime: number | "Infinity" | "-Infinity" | "NaN"
  machineTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  operatorTime: number | "Infinity" | "-Infinity" | "NaN"
  operatorTimeCost: number | "Infinity" | "-Infinity" | "NaN"
  setupCost: number | "Infinity" | "-Infinity" | "NaN"
  totalCost: number | "Infinity" | "-Infinity" | "NaN"
  currencyCode: string
  ownerId: string | null
  organizationId: string | null
  toolpathId: string
  details: {
    sourceSettingsId?: string | null
    inputs: {
      toolpathId: string
      toolId: string | null
      materialId: string | null
    }
    calculatedValues: {
      totalPathLengthMm: number | "Infinity" | "-Infinity" | "NaN"
      materialVolumeM3: number | "Infinity" | "-Infinity" | "NaN"
      feedRateMmMin: number | "Infinity" | "-Infinity" | "NaN"
      machineTimeMinutes: number | "Infinity" | "-Infinity" | "NaN"
      operatorTimeMinutes: number | "Infinity" | "-Infinity" | "NaN"
      totalSetupTimeMinutes: number | "Infinity" | "-Infinity" | "NaN"
    }
    costBreakdown: {
      material: number | "Infinity" | "-Infinity" | "NaN"
      toolWear: number | "Infinity" | "-Infinity" | "NaN"
      machineRun: number | "Infinity" | "-Infinity" | "NaN"
      operator: number | "Infinity" | "-Infinity" | "NaN"
      setup: number | "Infinity" | "-Infinity" | "NaN"
    }
  }
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.calculateEstimate

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsCalculateEstimateInput
const result = await client["production-costs"].calculateEstimate({
  toolpathId: "",
  costSettingsId: "",
  organizationId: ""
})

curl

POST /api/produktionskosten/schätzungen/kalkulieren

curl --request POST "${CADCAMFUN_URL}/api/production-costs/estimates/calculate" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

Anforderungstext application/json

/api/production-costs/material-costs

erhalten /api/production-costs/material-costs # production-costs.listMaterialCosts

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
materialId	abfrage	zeichenfolge \| null	optional
organizationId	abfrage	„null“ \| zeichenfolge \| null	optional

Antworten

200 Array<Objekt> application/json

Array<{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  materialId: string
  costPerUnit: number | "Infinity" | "-Infinity" | "NaN"
  wasteFactor: number | "Infinity" | "-Infinity" | "NaN"
  minimumCharge: number | "Infinity" | "-Infinity" | "NaN"
  material: {
    id: string
    name: string
    description: string | null
    properties: unknown
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
}>

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

Beispielantwort erfasst · 200

GET /api/produktionskosten/materialkosten

[]

SDK-Beispiel

production-costs.listMaterialCosts

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsListMaterialCostsInput
const result = await client["production-costs"].listMaterialCosts({})

curl

GET /api/produktionskosten/materialkosten

curl --request GET "${CADCAMFUN_URL}/api/production-costs/material-costs" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

materialId abfrage organizationId abfrage

post /api/production-costs/material-costs # production-costs.createMaterialCost

Erfordert Authorization: Bearer <token>.

Anforderungstext · erforderlich · application/json

{
  costPerUnit: number | "Infinity" | "-Infinity" | "NaN"
  wasteFactor?: number | "Infinity" | "-Infinity" | "NaN" | null
  minimumCharge?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
  materialId: string
  organizationId?: string | null
}

Antworten

201 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  materialId: string
  costPerUnit: number | "Infinity" | "-Infinity" | "NaN"
  wasteFactor: number | "Infinity" | "-Infinity" | "NaN"
  minimumCharge: number | "Infinity" | "-Infinity" | "NaN"
  material: {
    id: string
    name: string
    description: string | null
    properties: unknown
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

409 ConflictEncoded application/json

ConflictEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.createMaterialCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsCreateMaterialCostInput
const result = await client["production-costs"].createMaterialCost({
  costPerUnit: 0,
  wasteFactor: 0,
  minimumCharge: 0,
  currencyCode: "",
  materialId: "",
  organizationId: ""
})

curl

POST /api/produktionskosten/materialkosten

curl --request POST "${CADCAMFUN_URL}/api/production-costs/material-costs" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

Anforderungstext application/json

erhalten /api/production-costs/material-costs/{id} # production-costs.getMaterialCost

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt | null application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  materialId: string
  costPerUnit: number | "Infinity" | "-Infinity" | "NaN"
  wasteFactor: number | "NaN"
  minimumCharge: number | "NaN"
  material: {
    id: string
    name: string
    description: string | null
    properties: unknown
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
} | null

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.getMaterialCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsGetMaterialCostInput
const result = await client["production-costs"].getMaterialCost({
  id: "<id>"
})

curl

GET /api/produktionskosten/materialkosten/{id}

curl --request GET "${CADCAMFUN_URL}/api/production-costs/material-costs/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

setzen /api/production-costs/material-costs/{id} # production-costs.updateMaterialCost

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Anforderungstext · erforderlich · application/json

{
  costPerUnit?: number | "Infinity" | "-Infinity" | "NaN" | null
  wasteFactor?: number | "Infinity" | "-Infinity" | "NaN" | null
  minimumCharge?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
}

Antworten

200 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  materialId: string
  costPerUnit: number | "Infinity" | "-Infinity" | "NaN"
  wasteFactor: number | "Infinity" | "-Infinity" | "NaN"
  minimumCharge: number | "Infinity" | "-Infinity" | "NaN"
  material: {
    id: string
    name: string
    description: string | null
    properties: unknown
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.updateMaterialCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsUpdateMaterialCostInput
const result = await client["production-costs"].updateMaterialCost({
  id: "<id>",
  costPerUnit: 0,
  wasteFactor: 0,
  minimumCharge: 0,
  currencyCode: ""
})

curl

PUT /api/produktionskosten/materialkosten/{id}

curl --request PUT "${CADCAMFUN_URL}/api/production-costs/material-costs/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

ausweis pfad · erforderlich

Anforderungstext application/json

löschen /api/production-costs/material-costs/{id} # production-costs.deleteMaterialCost

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt application/json

{
  message: string
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.deleteMaterialCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsDeleteMaterialCostInput
const result = await client["production-costs"].deleteMaterialCost({
  id: "<id>"
})

curl

DELETE /api/produktionskosten/materialkosten/{id}

curl --request DELETE "${CADCAMFUN_URL}/api/production-costs/material-costs/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

/api/production-costs/operation-costs

erhalten /api/production-costs/operation-costs # production-costs.listOperationCosts

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
organizationId	abfrage	„null“ \| zeichenfolge \| null	optional

Antworten

200 Array<Objekt> application/json

Array<{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  name: string
  machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  operatorHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  setupTime: number | "Infinity" | "-Infinity" | "NaN"
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
}>

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

Beispielantwort erfasst · 200

GET /api/Production-Costs/Operation-Costs

[]

SDK-Beispiel

production-costs.listOperationCosts

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsListOperationCostsInput
const result = await client["production-costs"].listOperationCosts({})

curl

GET /api/Production-Costs/Operation-Costs

curl --request GET "${CADCAMFUN_URL}/api/production-costs/operation-costs" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

organizationId abfrage

post /api/production-costs/operation-costs # production-costs.createOperationCost

Erfordert Authorization: Bearer <token>.

Anforderungstext · erforderlich · application/json

{
  name: string
  machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  operatorHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  setupTime?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
  organizationId?: string | null
}

Antworten

201 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  name: string
  machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  operatorHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  setupTime: number | "Infinity" | "-Infinity" | "NaN"
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

409 ConflictEncoded application/json

ConflictEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.createOperationCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsCreateOperationCostInput
const result = await client["production-costs"].createOperationCost({
  name: "",
  machineHourlyRate: 0,
  operatorHourlyRate: 0,
  setupTime: 0,
  currencyCode: "",
  organizationId: ""
})

curl

POST /api/produktionskosten/betriebskosten

curl --request POST "${CADCAMFUN_URL}/api/production-costs/operation-costs" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

Anforderungstext application/json

erhalten /api/production-costs/operation-costs/{id} # production-costs.getOperationCost

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt | null application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  name: string
  machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  operatorHourlyRate: number | "NaN"
  setupTime: number | "NaN"
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
} | null

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.getOperationCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsGetOperationCostInput
const result = await client["production-costs"].getOperationCost({
  id: "<id>"
})

curl

GET /api/produktionskosten/operationskosten/{id}

curl --request GET "${CADCAMFUN_URL}/api/production-costs/operation-costs/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

setzen /api/production-costs/operation-costs/{id} # production-costs.updateOperationCost

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Anforderungstext · erforderlich · application/json

{
  name?: string | null
  machineHourlyRate?: number | "Infinity" | "-Infinity" | "NaN" | null
  operatorHourlyRate?: number | "Infinity" | "-Infinity" | "NaN" | null
  setupTime?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
}

Antworten

200 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  name: string
  machineHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  operatorHourlyRate: number | "Infinity" | "-Infinity" | "NaN"
  setupTime: number | "Infinity" | "-Infinity" | "NaN"
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

409 ConflictEncoded application/json

ConflictEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.updateOperationCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsUpdateOperationCostInput
const result = await client["production-costs"].updateOperationCost({
  id: "<id>",
  name: "",
  machineHourlyRate: 0,
  operatorHourlyRate: 0,
  setupTime: 0,
  currencyCode: ""
})

curl

PUT /api/produktionskosten/operationskosten/{id}

curl --request PUT "${CADCAMFUN_URL}/api/production-costs/operation-costs/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

ausweis pfad · erforderlich

Anforderungstext application/json

löschen /api/production-costs/operation-costs/{id} # production-costs.deleteOperationCost

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt application/json

{
  message: string
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.deleteOperationCost

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsDeleteOperationCostInput
const result = await client["production-costs"].deleteOperationCost({
  id: "<id>"
})

curl

DELETE /api/produktionskosten/operationskosten/{id}

curl --request DELETE "${CADCAMFUN_URL}/api/production-costs/operation-costs/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

/api/production-costs/tool-wear

erhalten /api/production-costs/tool-wear # production-costs.listToolWear

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
toolId	abfrage	zeichenfolge \| null	optional
organizationId	abfrage	„null“ \| zeichenfolge \| null	optional

Antworten

200 Array<Objekt> application/json

Array<{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  toolId: string
  wearRatePerMeter: number | "Infinity" | "-Infinity" | "NaN"
  replacementCost: number | "Infinity" | "-Infinity" | "NaN"
  replacementThreshold: number | "Infinity" | "-Infinity" | "NaN"
  tool: {
    id: string
    name: string
    type: string
    diameter: number | "Infinity" | "-Infinity" | "NaN"
    material: string
    numberOfFlutes: number | "Infinity" | "-Infinity" | "NaN" | null
    maxRPM: number | "Infinity" | "-Infinity" | "NaN" | null
    coolantType: string | null
    cuttingLength: number | "Infinity" | "-Infinity" | "NaN" | null
    totalLength: number | "Infinity" | "-Infinity" | "NaN" | null
    shankDiameter: number | "Infinity" | "-Infinity" | "NaN" | null
    cornerRadius?: number | "Infinity" | "-Infinity" | "NaN" | null
    tipAngle?: number | "Infinity" | "-Infinity" | "NaN" | null
    threadPitch?: number | "Infinity" | "-Infinity" | "NaN" | null
    holderDiameter?: number | "Infinity" | "-Infinity" | "NaN" | null
    holderLength?: number | "Infinity" | "-Infinity" | "NaN" | null
    stickout?: number | "Infinity" | "-Infinity" | "NaN" | null
    notes: string | null
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
  } | null
}>

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

Beispielantwort erfasst · 200

GET /api/produktionskosten/werkzeugverschleiß

[]

SDK-Beispiel

production-costs.listToolWear

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsListToolWearInput
const result = await client["production-costs"].listToolWear({})

curl

GET /api/produktionskosten/werkzeugverschleiß

curl --request GET "${CADCAMFUN_URL}/api/production-costs/tool-wear" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

toolId abfrage organizationId abfrage

post /api/production-costs/tool-wear # production-costs.createToolWear

Erfordert Authorization: Bearer <token>.

Anforderungstext · erforderlich · application/json

{
  wearRatePerMeter: number | "Infinity" | "-Infinity" | "NaN"
  replacementCost: number | "Infinity" | "-Infinity" | "NaN"
  replacementThreshold?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
  toolId: string
  organizationId?: string | null
}

Antworten

201 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  toolId: string
  wearRatePerMeter: number | "Infinity" | "-Infinity" | "NaN"
  replacementCost: number | "Infinity" | "-Infinity" | "NaN"
  replacementThreshold: number | "Infinity" | "-Infinity" | "NaN"
  tool: {
    id: string
    name: string
    type: string
    diameter: number | "Infinity" | "-Infinity" | "NaN"
    material: string
    numberOfFlutes: number | "Infinity" | "-Infinity" | "NaN" | null
    maxRPM: number | "Infinity" | "-Infinity" | "NaN" | null
    coolantType: string | null
    cuttingLength: number | "Infinity" | "-Infinity" | "NaN" | null
    totalLength: number | "Infinity" | "-Infinity" | "NaN" | null
    shankDiameter: number | "Infinity" | "-Infinity" | "NaN" | null
    cornerRadius?: number | "Infinity" | "-Infinity" | "NaN" | null
    tipAngle?: number | "Infinity" | "-Infinity" | "NaN" | null
    threadPitch?: number | "Infinity" | "-Infinity" | "NaN" | null
    holderDiameter?: number | "Infinity" | "-Infinity" | "NaN" | null
    holderLength?: number | "Infinity" | "-Infinity" | "NaN" | null
    stickout?: number | "Infinity" | "-Infinity" | "NaN" | null
    notes: string | null
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

409 ConflictEncoded application/json

ConflictEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.createToolWear

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsCreateToolWearInput
const result = await client["production-costs"].createToolWear({
  wearRatePerMeter: 0,
  replacementCost: 0,
  replacementThreshold: 0,
  currencyCode: "",
  toolId: "",
  organizationId: ""
})

curl

POST /api/produktionskosten/werkzeugverschleiß

curl --request POST "${CADCAMFUN_URL}/api/production-costs/tool-wear" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

Anforderungstext application/json

erhalten /api/production-costs/tool-wear/{id} # production-costs.getToolWear

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt | null application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  toolId: string
  wearRatePerMeter: number | "Infinity" | "-Infinity" | "NaN"
  replacementCost: number | "NaN"
  replacementThreshold: number | "NaN"
  tool: {
    id: string
    name: string
    type: string
    diameter: number | "NaN"
    material: string
    numberOfFlutes: number | "NaN" | null
    maxRPM: number | null
    coolantType: string | null
    cuttingLength: number | null
    totalLength: number | null
    shankDiameter: number | null
    cornerRadius?: number | null
    tipAngle?: number | null
    threadPitch?: number | null
    holderDiameter?: number | null
    holderLength?: number | null
    stickout?: number | null
    notes: string | null
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
  owner: {
    id: string
    name: string | null
    email?: string | null
  } | null
  organization: {
    id: string
    name: string | null
} | null

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.getToolWear

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsGetToolWearInput
const result = await client["production-costs"].getToolWear({
  id: "<id>"
})

curl

GET /api/Production-Costs/Tool-Wear/{id}

curl --request GET "${CADCAMFUN_URL}/api/production-costs/tool-wear/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

setzen /api/production-costs/tool-wear/{id} # production-costs.updateToolWear

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Anforderungstext · erforderlich · application/json

{
  wearRatePerMeter?: number | "Infinity" | "-Infinity" | "NaN" | null
  replacementCost?: number | "Infinity" | "-Infinity" | "NaN" | null
  replacementThreshold?: number | "Infinity" | "-Infinity" | "NaN" | null
  currencyCode?: string | null
}

Antworten

200 objekt application/json

{
  id: string
  createdAt: string
  updatedAt: string
  ownerId: string | null
  organizationId: string | null
  currencyCode: string
  toolId: string
  wearRatePerMeter: number | "Infinity" | "-Infinity" | "NaN"
  replacementCost: number | "Infinity" | "-Infinity" | "NaN"
  replacementThreshold: number | "Infinity" | "-Infinity" | "NaN"
  tool: {
    id: string
    name: string
    type: string
    diameter: number | "Infinity" | "-Infinity" | "NaN"
    material: string
    numberOfFlutes: number | "Infinity" | "-Infinity" | "NaN" | null
    maxRPM: number | "Infinity" | "-Infinity" | "NaN" | null
    coolantType: string | null
    cuttingLength: number | "Infinity" | "-Infinity" | "NaN" | null
    totalLength: number | "Infinity" | "-Infinity" | "NaN" | null
    shankDiameter: number | "Infinity" | "-Infinity" | "NaN" | null
    cornerRadius?: number | "Infinity" | "-Infinity" | "NaN" | null
    tipAngle?: number | "Infinity" | "-Infinity" | "NaN" | null
    threadPitch?: number | "Infinity" | "-Infinity" | "NaN" | null
    holderDiameter?: number | "Infinity" | "-Infinity" | "NaN" | null
    holderLength?: number | "Infinity" | "-Infinity" | "NaN" | null
    stickout?: number | "Infinity" | "-Infinity" | "NaN" | null
    notes: string | null
    isPublic: boolean
    createdAt: string
    updatedAt: string
    ownerId: string | null
    organizationId: string | null
  }
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.updateToolWear

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsUpdateToolWearInput
const result = await client["production-costs"].updateToolWear({
  id: "<id>",
  wearRatePerMeter: 0,
  replacementCost: 0,
  replacementThreshold: 0,
  currencyCode: ""
})

curl

PUT /api/produktionskosten/werkzeugverschleiß/{id}

curl --request PUT "${CADCAMFUN_URL}/api/production-costs/tool-wear/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}" \
  --header "Content-Type: application/json" \
  --data-binary @request.json

Probieren Sie es aus

ausweis pfad · erforderlich

Anforderungstext application/json

löschen /api/production-costs/tool-wear/{id} # production-costs.deleteToolWear

Erfordert Authorization: Bearer <token>.

Parameter

Name	In	Typ	Erforderlich
ausweis	weg	zeichenfolge	erforderlich

Antworten

200 objekt application/json

{
  message: string
}

400 BadRequestEncoded application/json

BadRequestEncoded

401 UnauthorizedEncoded application/json

UnauthorizedEncoded

403 ForbiddenEncoded application/json

ForbiddenEncoded

404 NotFoundEncoded application/json

NotFoundEncoded

500 InternalErrorEncoded application/json

InternalErrorEncoded

SDK-Beispiel

production-costs.deleteToolWear

import { CadCam } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

// ProductionCostsDeleteToolWearInput
const result = await client["production-costs"].deleteToolWear({
  id: "<id>"
})

curl

DELETE /api/produktionskosten/werkzeugverschleiß/{id}

curl --request DELETE "${CADCAMFUN_URL}/api/production-costs/tool-wear/<id>" \
  --header "Authorization: Bearer ${CADCAMFUN_TOKEN}"

Probieren Sie es aus

ausweis pfad · erforderlich

Schemata

Benannte Schemata, die über die Parameter, Körper und Antworten dieser Gruppe erreichbar sind. A ? markiert ein optionales Feld; | null markiert ein Feld, das möglicherweise mit einem Nullwert vorhanden ist.

BadRequestEncoded

{
  _tag: "BadRequest"
  message: string
}

ConflictEncoded

{
  _tag: "Conflict"
  message: string
}

ForbiddenEncoded

{
  _tag: "Forbidden"
  message: string
}

InternalErrorEncoded

{
  _tag: "InternalError"
  message: string
}

NotFoundEncoded

{
  _tag: "NotFound"
  message: string
}

UnauthorizedEncoded

{
  _tag: "Unauthorized"
  message: string
}

Ich rufe diese Gruppe an

Vorgangs-IDs haben die Form production-costs.<name>. Das generierte Promise SDK (@cadcamfun/api/sdk) entlarvt die meisten von ihnen als client.<namespace>.<method>(input), wo input ist ein flaches Objekt aus Pfadparametern und Körperfeldern; Das SDK-Beispiel jeder Karte zeigt den genauen Zugriffs- und Eingabetyp. Mehrteilige Uploads, Binär- oder JavaScript-Antworten und unformatierte Webhooks werden nicht generiert; Diese Karten zeigen fetch stattdessen.

Fehler vom Promise SDK

import { CadCam, ClientError } from "@cadcamfun/api/sdk"

const client = CadCam.make({
  baseUrl: process.env.CADCAMFUN_URL!,
  headers: { authorization: `Bearer ${process.env.CADCAMFUN_TOKEN}` },
})

try {
  await client.projects.list()
} catch (error) {
  if (error instanceof ClientError) {
    // Transport | UnexpectedStatus | UnsupportedContentType | MalformedResponse | SseEventTooLarge
  } else {
    // a declared error body: switch on error._tag
  }
}

Fehlerbehebung

Symptom	Wahrscheinliche Ursache	Fix
401 bei jedem Aufruf	Token von einem früheren Start oder fehlt `Bearer` präfix	Schicken `Authorization: Bearer <token>` mit dem Token wurde der Sidecar gestartet.
400 bevor etwas passiert	Text oder Parameter stimmen nicht mit dem Schema überein	Vergleichen Sie die Nutzlast mit dem Anforderungsschema auf der Karte.
403 oder 404 bei einem Datensatz, den du woanders siehst	Das amtierende Konto ist unterschiedlich	Schicken Sie das Richtige `x-session-token`, oder verwenden Sie das lokale Profil, das Eigentümer des Datensatzes ist.
409	Widersprüchlicher Status, z. B. ein doppelter Name oder ein veralteter Zweigkopf	Lesen Sie die Ressource erneut und versuchen Sie es erneut mit den aktuellen Daten.
Versuchen Sie es mit der Meldung „Von CORS blockiert“.	Die Dokumente werden von einem Nicht-Loopback-Ursprung bereitgestellt	Führen Sie die Dokumente lokal aus oder kopieren Sie die Anfrage als Curl.
Verbindung abgelehnt	Der Sidecar wurde an einem neuen Port neu gestartet	Lesen Sie den Port neu `ready` Zeile.